Replacing The Sas Expander Board; Preliminary Steps; Removing The Sas Expander Board Holder; Removing The Defective Sas Expander Board - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

7.3.11 Replacing the SAS expander board

Field Replaceable Unit
(FRU)
Tools: Phillips PZ2 / (+) No. 2 screw driver / hexagon screw driver 5 mm

7.3.11.1 Preliminary steps

"Locating the defective server" on page 53
Ê
"Suspending BitLocker functionality" on page 91
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
"Removing the fan holder" on page 233
Ê

7.3.11.2 Removing the SAS expander board holder

Ê Remove the SAS expander board holder, see section
expander board" on page

7.3.11.3 Removing the defective SAS expander board

Figure 84: Removing the mounted SAS expander board (A)
Ê Remove the two screws (see circles).
RX2540 M4
Hard disk drives (HDD) and solid state drives (SSD)
165.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the SAS
171