Removing The Slot Cover For The Riser Module 1 - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

9.7.1.2

Removing the slot cover for the riser module 1

Figure 178: Removing the slot cover for the riser module 1
Ê Remove the screw (see circle).
Ê Remove the slot cover (see arrow).
V
CAUTION!
Keep the slot cover for future use.
Always replace slot covers into unused PCI slot openings to comply
with applicable EMC regulations and satisfy cooling requirements.
RX2540 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
271