Installing A Hot-Plug Psu; Concluding Steps - Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual

6.2.1.3

Installing a hot-plug PSU

Figure 23: Installing a hot-plug PSU
Ê Push the PSU into its bay as far as it will go until the locking lever engages.
I
Ensure that the PSU engages correctly in the bay and is locked in
position. This is the only way to prevent the PSU from sliding out of its
bay and being damaged during transportation.
6.2.1.4

Concluding steps

"Connecting the power cord" on page 53
Ê
Ê If applicable, configure the redundant power supply.
GX2460 M1
Upgrade and Maintenance Manual
Power supply unit (PSU)
69