Handling Slot Covers On The Riser Card Holder; Installing The Slot Cover - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Expansion cards and backup units
9.6 Handling slot covers on the riser card
holder
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver / hexagon screw driver 5 mm
9.6.1

Installing the slot cover

Figure 175: Installing the slot cover
Ê Insert the slot cover.
V
CAUTION!
Take care that the EMC spring remains in its place.
Ê Fasten the slot cover with one screw (see circle).
268 Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2540 M4