Replacing The Connector Card; Preliminary Steps; Removing The Sas Expander Board - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

7.3.12 Replacing the connector card

Field Replaceable Unit
(FRU)
Tools: Phillips PZ2 / (+) No. 2 screw driver / hexagon screw driver 5 mm

7.3.12.1 Preliminary steps

"Locating the defective server" on page 53
Ê
"Suspending BitLocker functionality" on page 91
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
"Removing the fan holder" on page 233
Ê

7.3.12.2 Removing the SAS expander board

Ê Remove the assembled SAS expander board holder, see section
"Removing the SAS expander board" on page
RX2540 M4
Hard disk drives (HDD) and solid state drives (SSD)
Upgrade and Maintenance Manual
Hardware: 10 minutes
165.
175