Upgrading A Rear Extension Box - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) and solid state drives (SSD)
7.5.2

Upgrading a rear extension box

Field Replaceable Unit
(FRU)
Tools: Phillips PZ2 / (+) No. 2 screw driver / hexagon screw driver 5 mm
7.5.2.1 Preliminary steps
"Locating the defective server" on page 53
Ê
"Suspending BitLocker functionality" on page 91
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
Ê Remove all HDD/SSD modules from the rear side (see figure
page 181), see section
page 185.
V
CAUTION!
Ensure that all HDDs are uniquely identified so that you can reinsert
them into their original bays after replacing the HDD backplane.
"Getting access to the component" on page 58
Ê
"Removing the fan holder" on page 233
Ê
216
"Removing 2.5-inch HDD/SSD modules" on
Upgrade and Maintenance Manual
Hardware: 10 minutes
96 on
RX2540 M4