Installing The Front Panel Module - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

14.4.1.5 Installing the front panel module

Ê Install the front panel module, see section
module" on page
14.4.1.6 Concluding steps
"Installing the fan holder" on page 234
Ê
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resuming BitLocker functionality" on page 112
Ê
14.4.2 Removing the front USB3.0 connector
Upgrade and Repair Unit
(URU)
Tools: Phillips PZ2 screw driver / hexagon screw driver 5 mm
14.4.2.1 Preliminary steps
"Suspending BitLocker functionality" on page 91
Ê
"Locating the defective server" on page 53
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
"Removing the fan holder" on page 233
Ê
14.4.2.2 Removing the front panel module
Ê Remove the front panel module, see section
module" on page
RX2540 M4
438.
438.
Upgrade and Maintenance Manual
"Replacing the front panel
Hardware: 10 minutes
"Replacing the front panel
Front panel
457