Removing The Tpm - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

System board and components
Ê To turn off BitLocker and decrypt the volume, click Turn Off BitLocker,
and then click Decrypt the volume.
I
Decrypting the volume may be time-consuming. By decrypting the
volume, all of the information stored on that computer is decrypted.
For more information on how to disable BitLocker drive encryption,
see the Microsoft Knowledge Base.
Please see the Fujitsu web pages for more details.
Ê Disable TPM in the system board BIOS. Proceed as follows:
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, enter the BIOS setup menu.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
Ê Set the TPM Support and TPM State settings to Disabled.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, see the corresponding BIOS Setup Utility reference manual.
"Suspending BitLocker functionality" on page 91
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
"Removing the air duct" on page 88
Ê
Ê If applicable, remove the riser module 1, see section
modules" on page
"Removing the fan holder" on page 233
Ê

16.3.2.2 Removing the TPM

Ê If applicable, remove the OCP module, see section
module" on page
Ê Remove the system board, see section
board" on page 537
508
71.
250.
Upgrade and Maintenance Manual
"Handling riser
"Removing the OCP
"Removing the defective system
RX2540 M4