Installing A Psu; Concluding Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

6.2.3

Installing a PSU

Figure 65: Installing a PSU
Ê Push the PSU into its slot (1) as far as it will go until the locking latch snaps
in place (2).
V
CAUTION!
Ensure that the PSU properly engages in its slot and is locked in
position in order to prevent it from sliding out of the chassis during
transportation.
Ê If applicable, fold down the handle on the PSU.
6.2.4

Concluding steps

"Connecting the power cord" on page 87
Ê
If applicable, configure the redundant power supply.
Ê
"Performing a fan test" on page 129
Ê
TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
Power supply unit (PSU)
147