Connecting The Fbu - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Expansion cards and backup units

9.10.3.10 Connecting the FBU

Figure 200: Connecting the power cable
Ê Connect the FBU with the FBU cable to the RAID controller (see circle).
I
Therefore an already installed RAID controller must be removed, see
section
an expansion card" on page
Ê Run the cables as shown.
9.10.3.11 Concluding steps
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
Ê If applicable, "Updating expansion card firmware" on page
Ê If applicable, "Enabling Option ROM scan" on page
"Resuming BitLocker functionality" on page 112
Ê
302
"Removing an expansion card" on page 263
Upgrade and Maintenance Manual
254.
101.
and "Installing
100.
RX2540 M4