Updating Expansion Card Firmware - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Basic software procedures
5.2.3

Updating expansion card firmware

I
For Japan:
Follow the instructions provided separately.
After replacing the expansion card, it is essential to upgrade the firmware to the
latest version without connecting any storage devices. The latest expansion
card firmware version is available from the Fujitsu support web pages at:
http://ts.fujitsu.com/support/
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
I
Note on the boot watchdog
Before updating expansion card firmware, ensure that the boot watchdog
is disabled, see section
After updating expansion card firmware, enable the boot watchdog
again, see section
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from firmware updates.
Using the ServerView Update Manager
For more information on how to update the expansion card firmware using the
ServerView Update Manager or Update Manager Express (UME), see the
following manuals:
– ServerView Update Manager:
"ServerView Update Management" user guide
– ServerView Update Manager Express:
"Local System Update for PRIMERGY Servers" user guide
Using the flash tool
The latest firmware files are available as ASPs (Autonomous Support
Packages) for Windows or as DOS tools from the Fujitsu support web pages at:
http://ts.fujitsu.com/support/
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
Ê Select Drivers & Downloads.
Ê From the Select Product drop down lists, choose your PRIMERGY server
100
"Disabling the boot watchdog" on page
"Enabling the boot watchdog" on page
Upgrade and Maintenance Manual
92.
107.
RX2540 M4