Installing The New Fbu - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Expansion cards and backup units

9.11.6.3 Installing the new FBU

Ê Install the FBU in the holder and connect the FBU cable to the FBU, see
section "Preparing the FBU" on page 314
FBU" on page 317
Ê Install the FBU with the holder, see section
holder" on page 315
holder" on page 318
9.11.6.4 Concluding steps
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
326
(to the riser card holder (FL)).
(to the air duct) or section
(to the riser card holder (FL)).
Upgrade and Maintenance Manual
(to the air duct) or
"Installing the FBU with the
"Installing the FBU with the
"Preparing the
RX2540 M4