Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual page 552

Hide thumbs Also See for PRIMERGY RX2540 M4:
Table of Contents

Advertisement

Appendix A
I
LEDs A, B and C are visible from outside on the server rear. All other
LEDs are only visible if the server cover has been opened.
If the server has been powered off (power plugs must be disconnected) it is
possible to indicate the faulty component by pressing the indicate CSS button.
Indicator
A - Identification blue on
B - CSS
(Customer Self
Service)
C - GEL
(Global Error
LED)
F - Controller
G - CPU
552
Status
Description
The server has been highlighted using
ServerView Operations Manager, iRMC
web interface or the ID button on the front
panel for easy identification.
blue flashing
The server has been highlighted for easy
identification using the iRMC (AVR) with
disabled local VGA output.
off
No critical event detected (CSS
component).
orange on
Prefailure event detected (CSS
component).
orange flashing CSS component failure detected.
off
No critical event detected (non CSS
component).
orange on
Prefailure event detected (non CSS
component).
orange flashing Non CSS component failure detected.
Possible causes:
– System is out of the specified
– Defective sensor
– CPU error
– Error detected by server management
off
Controller okay
orange on
Controller failure (PCI card installed on
riser card)
off
CPU okay
orange on
CPU failure
Upgrade and Maintenance Manual
temperature range
software
RX2540 M4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents