Removing The Irmc Microsd Card - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Ê If applicable, remove the riser module 1, see section
modules" on page

16.4.2.2 Removing the iRMC microSD card

Figure 382: Removing the iRMC microSD card
Ê To eject the iRMC microSD card, gently push it in and then let go (1).
Ê Pull the iRMC microSD card straight out of its slot (2).
V
CAUTION!
The iRMC microSD card contains customer information. After removing
the iRMC microSD card, hand the card over to the customer.
16.4.2.3 Concluding steps
Ê If applicable, install the riser module 1, see section
on page 71.
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
16.4.3 Replacing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Tools: a pair of side-cutting pliers
RX2540 M4
71.
Upgrade and Maintenance Manual
System board and components
"Handling riser
"Handling riser modules"
Hardware: 5 minutes
515