8.3
Replacing the fan holder
Upgrade and Repair Unit
(URU)
Tools: Phillips PZ2 screw driver / hexagon screw driver 5 mm
8.3.1
Preliminary steps
"Locating the defective server" on page 53
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
8.3.2
Removing the fan holder
Ê Remove the fan module 1/2 and the fan module 5/6, see section
the fan module" on page
Figure 142: Removing the fan holder
Ê Lift the fan holder out of the chassis (see arrow).
RX2540 M4
231.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Fans
"Removing
233