Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual page 259

Figure 169: Installing Retimer controller in slot 9
Ê Connect the VPP cable to the connector "CON5" on the Retimer controller
(1).
Ê Install the Retimer controller in slot 9 (see arrow).
Ê Connect the VPP cable to the connector "VPP CPU2" on the system board
(2).
Ê Connect the color-coded Oculink cables to the corresponding HDD
backplane, see section
page 214.
RX2540 M4
"Connecting cables to the rear backplane" on
Upgrade and Maintenance Manual
Expansion cards and backup units
259