Connecting The Sas Cables (Three 2.5-Inch Hdd Backplanes) - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Ê Connect the power cables to the backplane 1:
3 Power cable
4 If applicable, ODD power cable
5 If applicable, OOB cable
Figure 111: Connecting cables - with SAS expander board (backplane 2)
Ê Connect the two SAS/SATA cables to the backplane 2:
1 Cable C30 to backplane connector "X10"
2 Cable C30 to backplane connector "X9"
Ê Connect the power cables to the backplane 1:
3 Power cable
4 If applicable, ODD power cable
5 If applicable, OOB cable
7.4.9.8

Connecting the SAS cables (three 2.5-inch HDD backplanes)

Cabling with SAS expander board
Ê Connect the cables to the HDD backplanes 1 and 2, see section
with SAS expander board" on page
RX2540 M4
Hard disk drives (HDD) and solid state drives (SSD)
Upgrade and Maintenance Manual
196.
"Cabling
197