Concluding Steps - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

9.10.2.9 Concluding steps

"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resuming BitLocker functionality" on page 112
Ê
9.10.3 Installing a GPGPU card in riser module 2
Upgrade and Repair Unit
(URU)
Tools: side cutter
Phillips PH2 / (+) No. 2 screw driver / hexagon screw driver 5 mm
9.10.3.1 Preliminary steps
"Suspending BitLocker functionality" on page 91
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
Ê If applicable, "Installing the riser card" on page 73
9.10.3.2 Installing a GPGPU card in a riser module
Ê If applicable, remove the slot cover from the riser card holder, see section
"Removing the slot cover" on page
Ê Install the GPGPU card in the riser module, see section
card in a riser module" on page
9.10.3.3 Installing the air grid extension to riser module 2
Ê Install the air grid extension to riser module 2, see section
grid extension to riser module 2" on page
RX2540 M4
269.
291.
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
Software: 5 minutes
"Installing a GPGPU
275.
"Installing the air
299