Handling Riser Modules - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

4.8

Handling riser modules

Riser module 2
Figure 14: Numbering riser modules
Note for installation with expansion cards in slot 5 and slot 11
Figure 15: Removing a connector from an expansion card in a riser in slot 5 or 11
Ê Insert a small tool (e.g. a small slotted screw driver) in the gap between the
connector and the housing to press down the locking mechanism (see
circle).
RX2540 M4
Upgrade and Maintenance Manual
Basic hardware procedures
Riser module 1
71