Removing The Front Panel Module - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Ê If applicable, remove the riser module, see section
GPGPU cards (FL)" on page

14.6.1.2 Removing the front panel module

Figure 348: Disconnecting the front panel cable
Ê Disconnect the following cables from the system board:
1 Front panel cable
2 If applicable, front VGA cable
3 Front USB3.0 cable
4 Power ODD cable
5 Data ODD cable
Ê Push the locking latch upward (4) to disengage the locking mechanism.
Ê Carefully push the front panel module out of its bay (5).
V
CAUTION!
Ensure that none of the cables are strained or damaged.
RX2540 M4
82.
Upgrade and Maintenance Manual
Front panel
"Riser modules for
469