Disconnecting Cables From The Rear Backplane - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Ê Remove all HDD/SSD modules from the server, see section
inch HDD/SSD modules" on page
V
CAUTION!
Ensure that all HDDs are uniquely identified so that you can reinsert
them into their original bays after replacing the HDD backplane.
"Getting access to the component" on page 58
Ê
"Removing the fan holder" on page 233
Ê
7.5.3.2

Disconnecting cables from the rear backplane

"Disconnecting cables from the rear backplane" on page 211
Ê
RX2540 M4
Hard disk drives (HDD) and solid state drives (SSD)
185.
Upgrade and Maintenance Manual
"Removing 2.5-
223