10.3
Removing a memory module
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver (for the riser module)
10.3.1 Preliminary steps
"Suspending BitLocker functionality" on page 91
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
Ê If applicable, remove the riser module, see section
GPGPU cards (FL)" on page
10.3.2 Removing a memory module
Figure 225: Removing memory modules (A)
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory slot.
RX2540 M4
82.
Upgrade and Maintenance Manual
Main memory
Hardware: 5 minutes
"Riser modules for
341