On Page; Concluding Steps - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Figure 88: Connecting cables to the 8x 2.5-inch combo HDD backplane (example onboard
PCIe)
▶ Connect the following cables to the combo HDD backplane:
1 Slimline cable
2 Slimline cable
3 Slimline cable
4 Power cable
5 Slimline cable
6 OOB cable
For the cable plan, see

Concluding steps

▶
"Installing the fan cage" on page
▶
"Reassembling" on page
▶ Insert all HDD/SSD modules, see

on page

167.
Ensure that you install the HDD/SSD module in the bay it was located
before the HDD backplane replacement.
RX2540 M6
Hard disk drive (HDD) / solid state disk (SSD)
"Appendix B" on page
76.
60.
"Installing a 2.5-inch HDD/SSD module"
Upgrade and Maintenance Manual
571.
183