Omron Sysmac NY-series Instruction & Reference Manual page 26

Related Manuals
Manual name
NX-series
NX Units
User's Manual
NX-series
Data Reference Manual
GX-series EtherCAT Slave
Units
User's Manual
AC Servomotors/Servo Drives
1S-series with
®
Built-in EtherCAT Communi-
cations User's Manual
AC Servomotors/Servo Drives
G5 Series with
®
Built-in EtherCAT Communi-
cations User's Manual
24
Cat. No. Model numbers
W521 NX-ID££££
NX-IA££££
NX-OC££££
NX-OD££££
NX-MD££££
W522 NX-AD££££
NX-DA££££
W592 NX-HAD£££
W566 NX-TS££££
NX-HB££££
W523 NX-PD1£££
NX-PF0£££
NX-PC0£££
NX-TBX01
W524 NX-EC0£££
NX-ECS£££
NX-PG0£££
W540 NX-CIF£££
W565 NX-RS££££
W567 NX-ILM£££
W525 NX-££££££
W488 GX-ID££££
GX-OD££££
GX-OC££££
GX-MD££££
GX-AD££££
GX-DA££££
GX-EC££££
XWT-ID££
XWT-OD££
I586 R88M-1£
R88D-1SN£-ECT
I621 R88M-1AL£/ -1AM
£
R88D-1SAN£-ECT
I576 R88M-K£
R88D-KN£-ECT
I577 R88L-EC-£
R88D-KN£-ECT-L
Application
Learning how to use Describes the hardware, setup methods,
NX Units. and functions of the NX Units.
Manuals are available for the following
Units.
Digital I/O Units, Analog I/O Units, System
Units, Position Interface Units, Communica-
tions Interface Units, Load Cell Input Unit,
and IO-Link Master Units.
Referencing lists of Lists of the power consumptions, weights,
the data that is re- and other NX Unit data that is required to
quired to configure configure systems with NX-series Units are
systems with NX-ser- provided.
ies Units.
Learning how to use Describes the hardware, setup methods
the EtherCAT remote and functions of the EtherCAT remote I/O
I/O terminals. terminals.
Learning how to use Describes the hardware, setup methods
the Servomotors/ and functions of the Servomotors/Servo
Servo Drives with Drives with built-in EtherCAT Communica-
built-in EtherCAT tions.
Communications.
Learning how to use Describes the hardware, setup methods
the AC Servomotors/ and functions of the AC Servomotors/Servo
Servo Drives with Drives with built-in EtherCAT Communica-
built-in EtherCAT tions.
Communications. The Linear Motor Type models and dedicat-
ed models for position control are available
in G5-series.
NY-series Motion Control Instructions Reference Manual (W561)
Description