Saving The Hyperterminal Configuration To A Connection File; Figure 4-14 Save As Dialog Box; Figure 4-15 Save As Dialog Box, Desktop Selected - Siemens Hicom Office PhoneMail Supplement To The Installation And System Administration Manual

4890_mpl.fm
Building the PC Interface for Your Office PhoneMail System
Starting a Non-Specific HyperTerminal Session
4.6.2

Saving the HyperTerminal Configuration to a Connection File

Saving the configuration to a connection file allows you to display the PC interface without re-
configuring the HyperTerminal window.
To save the HyperTerminal configuration in a connection file:
1. From the main menu bar of the PhoneMail - HyperTerminal window, click File > Save As.
The Save As dialog box appears (see Figure 4-14). The File name box contains the de-
fault file name PhoneMail.ht.
Figure 4-14 Save As Dialog Box
2. From the Save in box, select Desktop (see Figure 4-15).
Figure 4-15 Save As Dialog Box, Desktop Selected
4-12
HOP/HOP E, Version 2.0, Supplement to the Installation and System Administration Guide
A31003-S1220-D300-3-76D1
,
March 2000