Table of Contents
Advertisement
4 Web-based Switch Configuration
Figure 4.68– Configuration > IGMP Snooping > IGMP Snooping-Multicast Entry Table
Configuration > IGMP Snooping > IGMP Access Control Settings
The IGMP Access Control Settings page is used to enable or disable the IGMP access control of selected
ports.
Figure 4.69 – Configuration > IGMP Snooping > IGMP Access Control Settings
From Port/To Port: Select the port ranges to be configured.
Status: Enable or disable the IGMP Access Control of specified ports.
Click Apply to make the configurations take effect.
Configuration > IGMP Snooping > Host Table
The Host Table page displays the information of Host Table. Including VLAN ID, Group, Port Number and
Host IP.
Configuration > IGMP Snooping > IGMP Snooping Static Group Settings
The IGMP Snooping Static Group Settings page allows the Switch to read the Multicast Group IP address
and the corresponding MAC address from IGMP packets that pass through the Switch.
Figure 4.71- Configuration > IGMP Snooping > IGMP Snooping Static Group Settings
VLAN Name: Specifies the VLAN name of the multicast group.
VID List: Specifies the VID list or of the multicast group.
IPv4 Address: Specifies the IPv4 address.
Figure 4.70 - Configuration > IGMP Snooping > Host Table
5
5
D-Link DGS-2000 Series Ethernet Switch User Manual
7
7
Advertisement
Table of Contents
