Table of Contents
Advertisement
Related Commands
show log (4-44)
show logging
This command displays the configuration settings for logging messages to local
switch memory, to an SMTP event handler, or to a remote syslog server.
Syntax
show logging {flash | ram | sendmail | trap}
• flash - Displays settings for storing event messages in flash memory
(i.e., permanent memory).
• ram - Displays settings for storing event messages in temporary RAM
(i.e., memory flushed on power reset).
• sendmail - Displays settings for the SMTP event handler (page 4-48).
• trap - Displays settings for the trap function.
Default Setting
None
Command Mode
Privileged Exec
Example
The following example shows that system logging is enabled, the message level for
flash memory is "errors" (i.e., default level 3 - 0), and the message level for RAM is
"debugging" (i.e., default level 7 - 0).
Console#show logging flash
Syslog logging:
History logging in FLASH: level errors
Console#show logging ram
Syslog logging:
History logging in RAM: level debugging
Console#
Field
Syslog logging
History logging in FLASH
History logging in RAM
Enabled
Enabled
Table 4-15 show logging flash/ram - display description
Description
Shows if system logging has been enabled via the logging on command.
The message level(s) reported based on the logging history command.
The message level(s) reported based on the logging history command.
System Management Commands
4
4-43
Hide quick links:
Advertisement
Table of Contents
