4.
Insert one of ends of the rubber roller (A) into the side plate.
u NOTE u
Pay attention to the attachment orientation of the rubber roller.
5.
Insert the other end of the robber roller into the side plate.
011-202-08E
09.30.2009 FM5540
6.
Carry out the operations of the steps 7 and 8 from the direction
indicated by the arrow in the figure below.
7.
Align the housing with the hole on the side plate in orientation, and
then reinstall it.
8.
Align the housing with the hole on the side plate in orientation, and
then reinstall it.
CR-IR 363 Service Manual
MC-115
MC-115