FujiFilm PROFECT CS Service Manual page 674

Table of Contents

Advertisement

5.
Apply the tape to the rear of the guide.
u NOTE u
Apply carefully not to leave air bubbles between the tape and the guide.
6.
Apply the tape while keeping it by the finger.
u NOTES u
- Apply carefully not to leave air bubbles between the tape and the guide.
- Apply carefully not to leave wrinkles on the tape.
011-202-08E
09.30.2009 FM5540
7.
Check the distance between the rubber end to the tape end.
u NOTE u
Measure a distance from the rubber end to the tape end. If the difference
(difference in width between the A and B portions in the figure below) is larger
than 2 mm, return to the step 1 and re-apply a new tape.
8.
Fold the tape inside the guide.
CR-IR 363 Service Manual
MC-185
MC-185

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clearview csClearview csmCr-ir 363

Table of Contents