FujiFilm PROFECT CS Service Manual page 351

10.18.1 Check Procedures via Monitoring Function (14)
1.
Start the RU PC-TOOL.
{MU:4.2.1_Starting RU PC-TOOL}
2.
Start monitoring of the RU PC-TOOL.
{MT:10.2.1_Starting the Monitoring Function}
3.
Navigate on the LCD panel of the RU to enter the "Erasure" Mode.
{Instruction Manual}
4.
Set a cassette corresponding to the barcode reader to be checked.
l To check BCRA1:
Set a cassette in shelf 1.
l To check BCRA2:
Set a cassette in shelf 2.
l To check BCRA3:
Set a cassette in shelf 3.
l To check BCRA4:
Set a cassette in shelf 4.
l To check BCRC1:
Set the cassette on any shelf.
011-202-04
11.15.2004 FM4425
5.
Check the monitoring display.
Check the display of the monitoring window of the CL.
l Example of GOOD indication
l NO GOOD indication
For the barcode reader to be checked, neither "OPEN" nor "CLOSE" is displayed.
u NOTE u
Click on the [START] button in the monitoring window to initiate the monitoring
beforehand. Unless the monitoring is initiated, nothing is displayed in the window
even when the sensor changes its status.
6.
Exit the monitoring of the RU PC-TOOL.
{MT:10.2.2_Exiting the Monitoring Function}
CR-IR 363 Service Manual
MT-194
MT-194