13.3
Checking the Cable
n Procedures
1.
Turn OFF the power of the machine.
2.
Referring to the block diagram, check the following points.
{MT:17._Block Diagrams}
- The connector is securely plugged in.
- Check for shorts between each of the pins and GND → 2Ω or greater
- Check for shorts between each of the pins →
- Check for continuity of each of the pins →
011-202-04
11.15.2004 FM4425
2Ω or greater
1Ω or less
CR-IR 363 Service Manual
MT-233
MT-233