FujiFilm PROFECT CS Service Manual page 635

4.
Push in the upper portion of the side-positioning conveyer unit
horizontally.
u NOTE u
Push the side-positioning conveyer unit horizontally without lifting it. Otherwise,
the upper portion of the side-positioning conveyer unit might come into contact
with the ceiling of the housing, resulting in deformation or damage of the guide of
the side-positioning conveyer unit.
REFERENCE
When the upper portion of the side-positioning conveyer unit is pushed in, the pin
(upper) for retaining with the subscanning unit gets caught with the guide inside
the subscanning unit, to have the side-positioning conveyer unit retained.
011-202-08E
09.30.2009 FM5540
5.
Carry out the operations in the step 6 from the direction indicated by
the arrow in the figure below.
6.
Connect the connector.
CR-IR 363 Service Manual
MC-146
MC-146