FujiFilm PROFECT CS Service Manual page 763

4.
Carry out the operations in the step 5 from the direction indicated by
the arrow in the figure below.
5.
Check to ensure that the tip of the guide is mounted on the half punch.
u NOTE u
If the tip of the guide is not mounted on the half punch in the side plate, it might
cause the IP to get jammed.
011-202-08E
09.30.2009 FM5540
6.
Carry out the operations of the steps 7 and 8 from the direction
indicated by the arrow in the figure below.
7.
Attach the screw.
8.
Attach the screws.
CR-IR 363 Service Manual
MC-274
MC-274