FujiFilm PROFECT CS Service Manual page 450

21.
When writing from the IMG17A/B board to the FLASH ROM is
completed, press the [Enter] key.
u NOTE u
The following screen may fail to open due to an application error. If the following
screen does not appear on the display, wait about 10 minutes after the click of [OK]
in step 20, and then press the [Enter] key.
REFERENCE
Writing to the FLASH ROM will take about four minutes.
22.
Click on [OK].
011-202-07
09.30.2008 FM5340
23.
Check the version of the RU software.
u NOTE u
In the case of "NO GOOD" indication, return to step 16 and perform version
update procedures all over again.
24.
Turn OFF the power of the RU.
25.
Turn ON the power of the RU.
u NOTE u
Unless the power of the RU is turned OFF and back ON, the state only allows
you to perform INSTALL and VERSION UP.
CR-IR 363 Service Manual
MT-293
MT-293