FujiFilm PROFECT CS Service Manual page 280

5.18 Error Code Analysis Flow: Scanner 18
11687, 12687
n Analysis Flow
m Check the error log in the ERROR DB.
Q1
Errors 10230-10236 logged?
Y
Check the error code table again and troubleshoot.
N
{MT:2._Error Code Table}
A
Q2
Check the voltage of the SCN17A/SCT17B board test pin (CN5).
{MT:8._Procedures for Checking the Voltage}
Q3 CPU91A and SCN17A/SCT17B boards tested in MUTL normal?
{MT:18._Board Test in MUTL}
N
Q8
Y
Q4
Perform the diagnostics.
{MU:5.3 [5-1]_Diagnostic}
Q5
Check the photomultipliers (PMR).
{MT:13._Procedures for Checking the Scanner I/O}
Q6
Check the connector of the scanner board.
{MT:22.4_Checking the Connector on the Scanner Board}
Q7
011-202-04
11.15.2004 FM4425
Q7
Error recurs?
N
A
Y
m Disconnect and reconnect the connectors in the following sequence. If the error is
detected, replace the affected part.
1. SCN17A/SCT17B board
{MC:13.4_Scanner Board}
2. CPU91A board
{MC:13.2_CPU91A Board}
Q8
Reseat the error-causing board and check if the error occurs again.
N
A
Y
m Replace the error-causing board.
{MC:13.4_Scanner Board}
{MC:13.2_CPU91A Board}
CR-IR 363 Service Manual
MT-123
MT-123