FujiFilm PROFECT CS Service Manual page 197

Error
Error Name
Code
12370 Path guide HP detection retry (2)
12371 Path guide changeover retry
Convergence path guide
12372
changeover warning
Convergence path guide HP
12373
detection retry (2)
Side-positioning unit grip HP
12374
detection retry (1)
Side-positioning unit grip HP
12375
detection retry (2)
Side-positioning unit grip HP
12376
detection retry (3)
Side-positioning unit grip HP
12377
detection warning
Post-reading conveyor unit grip
12378
HP detection retry (1)
Post-reading conveyor unit grip
12379
HP detection retry (2)
Post-reading conveyor unit grip
12380
HP detection retry (3)
011-202-11E
06.29.2012 FM6046
During bootup/routine processing/M-Utility, the convergence path changeover guide drive motor (MB3) is driven to
perform home-positioning of the path changeover guide (feed/load conveyor unit); however, the path changeover
shelf sensor (SB7/8/9) does not transition to CLOSE within the specified period of time, thus resulting in a retry.
During bootup/routine processing/M-Utility, the convergence path changeover guide drive motor (MB3) is driven to
perform path changeover operation (feed/load conveyor unit); however, the path changeover shelf sensor (SB7/8/9)
and path changeover HP sensor (SB11) do not transition to CLOSE within the specified period of time, thus resulting
in a retry.
During bootup/routine processing/M-Utility, the convergence path changeover guide drive motor (MB3) is driven
to perform path changeover operation (feed/load conveyor unit) after IP erasure; however, the convergence path
changeover sensor (SB10) does not transition to CLOSE within the specified period of time, thus resulting in HP
positioning.
During bootup/routine processing/M-Utility, the convergence path changeover guide drive motor (MB3) is driven
to perform path changeover operation (feed/load conveyor unit) after IP erasure; however, the convergence path
changeover sensor (SB10) does not transition to CLOSE within the specified period of time.
During bootup/M-Utility, the grip release motor (MC2) is driven for one pulse to perform grip home-positioning of the
side-positioning conveyor unit; however, the grip release HP sensor (SC2) does not transition to CLOSE within the
specified period of time, thus resulting in a retry.
During bootup/M-Utility, the grip release motor (MC2) is driven to perform grip home-positioning of the side-
positioning conveyor unit; however, the grip release HP sensor (SC2) does not transition to CLOSE within the
specified period of time, thus resulting in a retry.
During bootup/M-Utility, the grip release motor (MC2) is driven to perform grip home-positioning of the side-
positioning conveyor unit; however, the grip release HP sensor (SC2) does not transition to OPEN within the
specified period of time, thus resulting in a retry.
During bootup/routine processing/M-Utility, the grip release motor (MC2) is driven to perform grip operation of the
side-positioning conveyor unit; however, the grip release HP sensor (SC2) does not transition to CLOSE, so that
home-positioning is performed.
During bootup/M-Utility, the grip release motor (MD1) is driven for one pulse to perform grip home-positioning of
the post-reading conveyor unit; however, the grip release HP sensor (SD1) does not transition to CLOSE within the
specified period of time, thus resulting in a retry.
During bootup/M-Utility, the grip release motor (MD1) is driven to perform grip home-positioning of the post-reading
conveyor unit; however, the grip release HP sensor (SD1) does not transition to CLOSE within the specified period
of time, thus resulting in a retry.
During bootup/M-Utility, the grip release motor (MD1) is driven to perform grip home-positioning of the post-reading
conveyor unit; however, the grip release HP sensor (SD1) does not transition to OPEN within the specified period of
time, thus resulting in a retry.
Occurrence Condition
CR-IR 363 Service Manual
MT-40
Analysis
Flow
{MT:4.7}
{MT:4.7}
{MT:4.44}
{MT:4.44}
{MT:4.8}
{MT:4.8}
{MT:4.8}
{MT:4.8}
{MT:4.9}
{MT:4.9}
{MT:4.9}
MT-40