FujiFilm PROFECT CS Service Manual page 349

10.17.1 Checking with a Scanner Board LED
1.
Start the MUTL.
{MU:5.2.1_Starting the MUTL}
2.
Select Sub Scanning 1.
3.
Select Stopper HP and then set it to [RETREATED].
4.
Turn ON the laser.
011-202-04
11.15.2004 FM4425
5.
From the rear of the RU, insert the IP by hand and note the SOH LED
on the SCN17A/SCT17B board.
l GOOD indication
When the IP is inserted: The LED comes on.
When the IP is removed: The LED goes off.
l NO GOOD indication
The LEDs do not change.
CR-IR 363 Service Manual
MT-192
MT-192