FujiFilm PROFECT CS Service Manual page 602

6.
Remove the spur gear and tension coil spring.
u INSTRUCTION u
The spur gear to be removed depends on the removed rubber roller. Remove
the spur gear mounted forward to the tension coil spring.
7.
Rotate the housing until the orientation indicated in the figure below is
reached, and then remove it.
8.
Rotate the housing until the orientation indicated in the figure below is
reached, and then remove it.
011-202-08E
09.30.2009 FM5540
9.
Carry out the operations of the steps 10 and 11 from the direction
indicated by the arrow in the figure below.
10.
Rotate the housing until the orientation indicated in the figure below is
reached, and then remove it.
11.
Rotate the housing until the orientation indicated in the figure below is
reached, and then remove it.
CR-IR 363 Service Manual
MC-113
MC-113