Driving-Side Grip Release Hp Sensor (Sz2) And Driven-Side Grip; Release Hp Sensor (Sz3) Removal Procedures; Release Hp Sensor (Sz3) Reinstallation Procedures - FujiFilm PROFECT CS Service Manual

12.11 Driving-Side Grip Release HP
Sensor (SZ2) and Driven-Side Grip
Release HP Sensor (SZ3)
{SP:INDEX}
 Removal Procedures
1.
Remove the cover.
- Lower left-hand side cover
{MC:3.1_Covers}
2.
Disconnect the connectors.
011-202-11E
06.29.2012 FM6046
3.
Remove the SZ2 and SZ3.
 Reinstallation Procedures
u NOTE u
Make sure that the latches of the sensor are hooked properly.
For reinstallation, reverse the removal steps.
CR-IR 363 Service Manual
MC-338
MC-338