Erasure Side-Positioning (Me2/Me3) - FujiFilm PROFECT CS Service Manual

[7-2-4] Erasure Side-positioning (ME2/ME3)

n Function
Drive the side-positioning motor (ME2) to perform side-positioning operation
corresponding to the IP size.
As during routine operation, the grip release motor (ME3) is driven to perform grip
releasing, and perform side-positioning operation twice.
n Procedures: Example where 18" x 24" size side-positioning
operation is performed
1.
Place the RU in the Maintenance Mode.
Start the User Utility.
{MU:2.2.1_Starting the User Utility}
2.
Start the MUTL.
{MU:5.2.1_Starting the MUTL}
3.
Select Erasure Conveyor 1.
4.
Select Erasure Side-positioning Operation IP Size.
{MU:5.3 [7-2-9]_Erasure Side-positioning Size Selection}
011-202-08E
09.30.2009 FM5540
5.
Select the IP size "1824", and select Erasure Side-positioning (ME2/
ME3).
If an error code is displayed on the MUTL, instead of "RESULT-OK", then refer to the
error code table and troubleshoot as appropriate.
6.
Exit the MUTL.
{MU:5.2.2_Exiting the MUTL}
7.
Turn OFF and back ON the power of the RU.
CR-IR 363 Service Manual
MU-122
MU-122