FujiFilm PROFECT CS Service Manual page 354

10.19.2 Check Procedures via LEDs on the SNS Board (15)
1.
Perform the procedures for starting the LED check.
{MT:10.3.1_Procedures for Starting the LED Check}
2.
Allow the cassette to be inserted and ejected with the hold released.
Check the LED display on the SNS17B board.
- To check SA2: Set a cassette in shelf 1.
- To check SA8: Set a cassette in shelf 2.
- To check SA14: Set a cassette in shelf 3.
- To check SA20: Set a cassette in shelf 4.
l GOOD indication
The LED changes its status (lit to unlit or unlit to lit) when the cassette is inserted
and ejected.
l NO GOOD indication
The LED does not change.
3.
Perform the procedures for exiting the LED check.
{MT:10.3.2_Procedures for Exiting the LED Check}
011-202-04
11.15.2004 FM4425
CR-IR 363 Service Manual
MT-197
MT-197