Rubber Roller (E) Removal Procedures; Rubber Roller (E) Reinstallation Procedures; Rubber Roller (E) Check/Adjustment Procedures - FujiFilm PROFECT CS Service Manual

7.26 Rubber Roller (E)
{SP:INDEX}
 Rubber Roller Locations
 Removal Procedures
1.
Remove the grip mechanism (reference side).
{MC:7.19_Grip Mechanism (Reference Side)}
2.
Remove the grip mechanism (opposite reference side).
{MC:7.20_Grip Mechanism (Opposite Reference Side)}
3.
Remove the shock-absorbing roller assembly.
{MC:7.22_Shock-Absorbing Roller Assembly}
011-202-08E
09.30.2009 FM5540
4.
Remove the rubber roller (E).
u INSTRUCTION u
The rubber roller (E) removal step varies with the serial number of the machine.
Confirm the serial number and then perform the associated procedure.
- #20004, #20030, #20034, #20046 to 20048, #20058, #20060, #20063,
#20068, #20071, #20073, #20088, #20090, #20097, #20112 or later
{■ Detailed Illustrated Procedure (Step 4-a)}
- Other serial numbers
{■ Detailed Illustrated Procedure (Step 4-b)}
 Reinstallation Procedures
For reinstallation, reverse the removal steps.
 Check/Adjustment Procedures
CHECK 1
l
The tension coil springs differ in length depending on where they are attached. Make
sure that the tension coil springs are attached in their correct locations.
CR-IR 363 Service Manual
MC-170
MC-170