FujiFilm PROFECT CS Service Manual page 740

4.
Check to ensure that the latch of the spur gear gets caught in the
groove of the rod and does not come off.
5.
Verify the attachment of the housing and the bearing from the bottom
of the erasure conveyer unit.
u NOTE u
Check to ensure that the portions indicated by the dotted lines in the figure below
have not come off from the side plate of the erasure conveyer unit.
011-202-08E
09.30.2009 FM5540
6.
Reinstall the erasure conveyor unit.
{MC:9.1_Erasure Conveyor Unit}
CR-IR 363 Service Manual
MC-251
MC-251