7.
Carry out the operations of the steps 8 and 9 from the direction
indicated by the arrow in the figure below.
8.
Raise the rear of the guide.
011-202-08E
09.30.2009 FM5540
9.
Remove the guide while keeping clear of the half punches inside the
side plate.
u NOTE u
Remove the guide carefully not to allow the guide to tilt laterally. If the guide is
tilted, it might get caught with the side plate and cannot be removed.
REFERENCE
Shown below is how to remove the guide when viewed from the side face of the
machine.
CR-IR 363 Service Manual
MC-272
MC-272