FujiFilm PROFECT CS Service Manual page 570

2.
Remove the screws, and remove the stopper.
3.
Remove the screws, and remove the guide plate.
011-202-08E
09.30.2009 FM5540
4.
Carry out the operation of the procedure 5 from the direction indicated
by the arrow in the figure.
5.
Push up the end of the actuator, check that orientations of the shaft
end of the actuator and the notch on the bracket coincide with each
other, and then raise up straight for removal.
CR-IR 363 Service Manual
MC-81
MC-81