FujiFilm PROFECT CS Service Manual page 287

6.5 Error Code Analysis Flow: Electrical 5
11731, 11751, 11781
n Analysis Flow
m START
Q1
Error 12813 logged?
Y
Check the error code table again and troubleshoot.
N
{MT:2._Error Code Table}
Perform preparation procedures in the order named.
m
1. Secure space for servicing the machine.
2. Remove the covers.
3. Turn OFF the high-voltage switch of the SCN17A/SCT17B board.
A
Q2
CPU91A and SNS17A/B boards tested in MUTL normal?
{MT:18.__Board Test in MUTL}
N
Q5
Y
Q3
Lamp temperature sensor (THE1) properly conducting?
{MT:17.14_Erasure Lamps and Fan 2}
N
Replace the lamp temperature sensor (THE1).
Y
{MC:9.11_Lamp Temperature Sensor (THE1)}
Q4
Error occurs when the CPU91A and SNS17A/B board are reseated?
N
A
Y
m Replace the error-causing board.
{MC:13.2_CPU91A Board}
{MC:13.7_SNS17B/SNS17C/SNS17E Board}
{MC:13.8_SNS17A/SNS17D Board}
011-202-11E
06.29.2012 FM6046
Q5
Reseat the CPU91A and SNS17A/B boards and check if the error occurs again.
N
A
Y
m Replace the boards in the order named.
1. CPU91A board
{MC:13.2_CPU91A Board}
2. SNS17A/B board
{MC:13.7_SNS17B/SNS17C/SNS17E Board}
{MC:13.8_SNS17A/SNS17D Board}
CR-IR 363 Service Manual
MT-130
MT-130