FujiFilm PROFECT CS Service Manual page 360

10.21.2 Check Procedures via LEDs on the SNS Board (17)
1.
Perform the procedures for starting the LED check.
{MT:10.3.1_Procedures for Starting the LED Check}
2.
Manually raise/lower the movable guide, and check the display on the
LED of the SNS17B board.
- To check SA6: Raise/lower the movable guide of shelf 1.
- To check SA12: Raise/lower the movable guide of shelf 2.
- To check SA18: Raise/lower the movable guide of shelf 3.
- To check SA24: Raise/lower the movable guide of shelf 4.
l GOOD indication
The LED changes its status (lit to unlit or unlit to lit) when the movable guide is
raised/lowered.
l NO GOOD indication
The LED does not change.
3.
Perform the procedures for exiting the LED check.
{MT:10.3.2_Procedures for Exiting the LED Check}
011-202-04
11.15.2004 FM4425
CR-IR 363 Service Manual
MT-203
MT-203