FujiFilm PROFECT CS Service Manual page 270

5.8 Error Code Analysis Flow: Scanner 8
10244, 10261, 10283, 12203, 12204, 12213, 12244,
12261, 12262, 12263, 12264
n Analysis Flow
m Check the error log in the ERROR DB.
Q1 Errors 10230-10236 logged?
Y
Check the error code table again and troubleshoot.
N
{MT:2._Error Code Table}
A
Q2
Check the voltage of the SCN17A/SCT17B board test pin (CN5).
{MT:8._Procedures for Checking the Voltage}
Q3
CPU91A and SCN17A/SCT17B boards tested in MUTL normal?
{MT:18._Board Test in MUTL}
N
Q6
Y
Q4
Check the polygon (POL).
{MT:13._Procedures for Checking the Scanner I/O}
Q5
Error recurs?
N
A
Y
m Disconnect and reconnect the connectors in the following sequence. If the error is
detected, replace the affected part.
1. SCN17A/SCT17B board
{MC:13.4_Scanner Board}
2. Scanning optics unit
{MC:10._Scanning Optics Unit}
3. CPU91A board
{MC:13.2_CPU91A Board}
011-202-04
11.15.2004 FM4425
Q6
Reseat the error-causing board and check if the error occurs again.
N
A
Y
m Replace the error-causing board.
{MC:13.2_CPU91A Board}
{MC:13.4_Scanner Board}
CR-IR 363 Service Manual
MT-113
MT-113