FujiFilm PROFECT CS Service Manual page 254

4.36 Error Code Analysis Flow: Mechanism 36
10459, 11459
n Analysis Flow
m Check the error log in the ERROR DB.
Q1
The indicated error is at the beginning of the error log?
{MT:1.4_Troubleshooting from Error Log}
N
Check the error code table again for the error at the beginning, and troubleshoot.
Y
{MT:2._Error Code Table}
Q2
Power supply error (12810-12875) occurs?
Y
Check the error code table again and troubleshoot.
N
{MT:2._Error Code Table}
Q3
Check if the IP remains in the erasure conveyer unit. If it remains, remove it.
{MT:16.2_Removing the IP from the Erasure Conveyor Unit}
Q4
Initialize the backup memory in MUTL and check if the error occurs again.
{MU:5.3 [3-1]_Backup Memory Clear (CPU Board)}
N
END
Y
m Perform preparation procedures in the order named.
1. Secure space for servicing the machine.
2. Remove the covers.
3. Turn OFF the high-voltage switch of the SCN17A/SCT17B board.
A
Check the voltage on the CPU91A and DRV17A boards.
m
{MT:8._Procedures for Checking the Voltage}
Q5
011-202-11E
06.29.2012 FM6046
Q5
CPU91A, DRV17A/B, and SNS17A/B boards tested in MUTL normal?
{MT:18._Board Test in MUTL}
N
Q7
Y
Q6
Error recurs?
N
A
Y
m Replace the boards in the order named.
1. SNS17A/B board
{MC:13.7_SNS17B/SNS17C/SNS17E Board}
{MC:13.8_SNS17A/SNS17D Board}
2. DRV17A/B board
{MC:13.5_DRV17A Board}
{MC:13.6_DRV17B Board}
3. CPU91A board
{MC:13.2_CPU91A Board}
Q7
Reseat the error-causing board and check if the error occurs again.
N
A
Y
m Replace the error-causing board.
{MC:13.2_CPU91A Board}
{MC:13.5_DRV17A Board}
{MC:13.6_DRV17B Board}
{MC:13.7_SNS17B/SNS17C/SNS17E Board}
{MC:13.8_SNS17A/SNS17D Board}
CR-IR 363 Service Manual
MT-97
MT-97