FujiFilm PROFECT CS Service Manual page 476

29.
From "LIST OF EXISTING RU", select a RU where the IP address is to
be set, and enter "IP ADDRESS" and "CL NAME" of the CL.
u INSTRUCTION u
"IP ADDRESS" and "CL NAME" of the CL that were checked before performing
the procedures for restoring the application should be entered.
011-202-04
11.15.2004 FM4425
30.
From "LIST OF EXISTING RU", select a RU for its data restore, and
restore the "CONFIGURATION", "HISTORY LOG", and "SCN ALL
DATA" data.
u NOTE u
If the floppy disk that stores the data to be restored is not on hand, perform setup
as directed below:
- CONFIGURATION: Perform setup again from the RU PC-TOOL's "EDIT
CONFIG".
- HISTORY LOG: Perform setup again from the RU PC-TOOL's "EDIT
HISTORY" as much as possible.
- SCN ALL DATA: Restore the data from the machine shipment control data
floppy disk that is supplied with the machine.
REFERENCE
For details on the restore procedure, see under "23. BACKUP/RESTORE
Procedure" in the Checks, Replacement and Adjustment volume.
{MC:23._BACKUP/RESTORE Procedure}
CR-IR 363 Service Manual
Appx MT-8
Appx MT-8